2013 BMW F31 Stock Height with 19×8.5 Niche Mazzanti & 245/35R19 Tires

2013 BMW F31 Wheel and Tire Setup

This 2013 BMW F31 runs a square set of 19×8.5 Niche Mazzanti wheels finished in Bronze Brushed and wrapped in 245/35R19 tires at all four corners. The suspension remains at factory ride height, making the wheel and tire package responsible for the change in stance on this 3 Series Touring.

The concave multi-spoke Mazzanti design suits the long roofline of the F31 wagon especially well. Bronze Brushed adds warmth against a light body color and keeps the face readable without going to a full chrome look.

Factory vs New Specs

A common factory setup on the 2013 BMW F31 uses an 8×18 wheel with a 225/45R18 tire measuring approximately 25.97 inches tall. Other factory packages included 17 inch and staggered 18 or 19 inch combinations depending on options.

Factory Wheel: Approximately 8×18 on the common square package.

Factory Tire: 225/45R18, measuring approximately 25.97 inches tall.

New Wheel: 19×8.5 Niche Mazzanti at all four corners.

New Wheel Offset: +35mm.

New Tire: 245/35R19, measuring approximately 25.75 inches tall.

Wheel Diameter: The wheel increases by 1 inch, from 18 inches to 19 inches.

Wheel Width: Width increases from approximately 8 inches to 8.5 inches.

Tire Width: Nominal tire width increases from 225mm to 245mm.

Tire Diameter and Ground Clearance

The factory 225/45R18 measures approximately 25.97 inches tall, while the 245/35R19 measures approximately 25.75 inches.

That is a difference of about 0.22 inch in overall diameter, with the new tire slightly shorter. Static ground clearance changes by only about 0.11 inch from the tire itself, which is effectively a small change in normal use.

Keeping overall tire diameter this close to factory is one of the reasons 245/35R19 works well on a 19×8.5 F31 setup. The wagon gets a larger-looking wheel without a major change in rolling diameter.

Speedometer difference is also small. Because the 245/35R19 is slightly shorter than stock, actual road speed is approximately 0.8 percent lower than the indicated speed.

Offset and Wheel Position

The Niche Mazzanti used for this application measures 19×8.5 with a +35mm offset at all four corners. Compared with a factory-style 8×18 ET34 wheel, the new wheel is 0.5 inches wider and uses 1mm more positive offset.

When both width and offset are considered, the outer edge of the Mazzanti sits approximately 5mm, or about 0.21 inch, farther outward per side than the factory reference wheel.

The inside edge moves about 7mm, or about 0.29 inch, closer to the suspension. Most of the stance change still reads as a clean, near-flush fill at stock height rather than an aggressive poke.

Fitment and Stance

The 19×8.5 Mazzanti package gives the F31 Touring a cleaner, more filled arch than a common 18 inch factory wheel while staying within a familiar plus-one diameter step for the chassis.

The additional half-inch of wheel width and the 245 tire create a squarer sidewall look than the factory 225, which helps the Bronze Brushed face read clearly under South Florida light.

At stock ride height, the 19 inch wheel fills the opening without needing a suspension drop for the appearance shown here.

Fitment Notes

Suspension: This build remains at factory ride height with no lift or lowering kit required for the appearance shown here.

Tire Size: 245/35R19 is a commonly used size with 19×8.5 wheels on F3x chassis cars and keeps overall diameter close to the factory 225/45R18.

Rubbing: The gallery fitment notes list no rubbing for this build. Final clearance should still be checked through full steering lock and suspension compression during installation.

Poke: The +35mm offset places the wheel only about 5mm farther toward the fender than the factory ET34 setup, for a clean flush appearance at stock height.

Inner Clearance: The inner edge moves about 7mm closer to the suspension than the factory 8 inch wheel. Clearance should still be verified at full lock during installation.

Center Bore: The Niche Mazzanti 19×8.5 5×120 variant uses a 72.6mm center bore, matching the F31 hub.

Wheel Load Rating: The cataloged variant lists a 1,800 pound load rating per wheel. Tire load capacity should also be verified for the vehicle.

Ride and Drivability

The biggest drivability change comes from the reduced tire sidewall. Moving from a 225/45R18 to a 245/35R19 shortens the rubber between the wheel and the road, so sharper impacts will be more noticeable on Miami streets and highway expansion joints.

At the same time, keeping overall tire diameter close to factory helps preserve gearing, ride height and speedometer accuracy.

The 245mm tire also provides a wider footprint than the original 225mm tire without going excessively wide for an 8.5 inch wheel.

Stock Suspension

The F31 3 Series Touring uses a MacPherson strut front suspension and a five-link rear suspension. Adaptive dampers were available on some packages, so exact damper hardware can vary even when ride height remains stock.

For gallery fitment purposes, the important detail is that this build maintains its factory ride height and does not rely on a lift or lowering modification to accommodate the 19 inch wheel and tire package.

Fitment Dynamics Miami

Fitment Dynamics carries wheels, tires and suspension upgrades for BMW F31 applications, including Niche wheel and tire packages in 18, 19 and 20 inch fitments. Our team can help determine the proper wheel width, offset and tire size while accounting for fender clearance, suspension clearance, load capacity and everyday drivability.

Customers can visit Fitment Dynamics in the Miami area for professional wheel and tire installation, fitment assistance and local pickup, or have their wheel and tire package shipped nationwide directly to their door.

Fitment Dynamics
8224 NW South River Dr
Medley, FL 33166
786-244-5565