2020 Chevrolet Tahoe Stock Height with 24×10 Niche Rise & 305/35R24 Tires

2020 Chevrolet Tahoe Wheel and Tire Setup

This 2020 Chevrolet Tahoe runs a square set of 24×10 Niche Rise wheels finished in anthracite with a machined face and wrapped in 305/35R24 Toyo Proxes ST III tires at all four corners. The suspension remains at factory ride height, making the wheel and tire package responsible for the change in stance on this final-year K2XX Tahoe.

The multi-spoke Rise design suits the Tahoe’s tall body especially well because the dense Y-spoke pattern visually fills the 24 inch diameter without looking sparse against the large fender openings. The anthracite machined finish adds bright spoke faces against the dark recesses and complements the white bodywork while keeping the package clean for Miami streets and highway runs.

Factory vs New Specs

A common factory setup on the 2020 Chevrolet Tahoe uses a 20×9 wheel with a +27mm offset and a 275/55R20 tire measuring approximately 31.9 inches tall. Other factory packages included 18×8.5 with 265/65R18 and 22×9 with 285/45R22 depending on options.

Factory Wheel: Approximately 20×9 +27.

Factory Tire: 275/55R20, measuring approximately 31.91 inches tall.

New Wheel: 24×10 Niche Rise at all four corners.

New Wheel Offset: +30mm.

New Tire: 305/35R24, measuring approximately 32.41 inches tall.

Wheel Diameter: The wheel increases by 4 inches, from 20 inches to 24 inches.

Wheel Width: Width increases from approximately 9 inches to 10 inches.

Tire Width: Nominal tire width increases from 275mm to 305mm.

Tire Diameter and Ground Clearance

The factory 275/55R20 measures approximately 31.91 inches tall, while the 305/35R24 measures approximately 32.41 inches.

That is a difference of about 0.50 inch in overall diameter, or roughly 1.6 percent taller. Static ground clearance increases by about 0.25 inch from the tire itself.

Keeping the overall tire diameter this close to the common 20 inch factory package is one of the reasons 305/35R24 works well on a 24×10 Rise setup. The Tahoe gets the appearance of a much larger wheel without a dramatic change in rolling diameter.

Speedometer difference remains small. Because the 305/35R24 is only slightly taller than the common 20 inch factory tire, actual road speed is approximately 1.6 percent higher than the indicated speed.

Offset and Wheel Position

The Niche Rise used for this application measures 24×10 with a +30mm offset. Compared with a factory-style 20×9 +27 wheel, the new wheel is one inch wider and uses 3mm more positive offset.

When both width and offset are considered, the outer edge of the Rise sits approximately 10mm, or about 0.38 inch, farther outward per side than the factory reference wheel.

The inside edge moves about 16mm, or roughly 0.62 inch, closer to the suspension. Most of the visual change still reads as a fuller, near-flush stance in the Tahoe’s openings rather than an extreme poke.

Fitment and Stance

The 24×10 +30 wheel paired with a 305/35R24 tire gives the Tahoe a much stronger street-oriented stance while remaining close to the original overall tire diameter.

The additional wheel width moves the package closer to the fender line than a factory 9 inch wheel, while the 305 tire fills the 10 inch barrel without jumping to an extreme truck width.

At stock ride height, the 24 inch Rise fills the K2XX opening. The thinner 35-series sidewall tightens the arch gap relative to a taller 55-series factory 20 inch tire and sharpens the overall profile.

Fitment Notes

Suspension: This build remains at factory ride height with no lift or lowering kit required for the appearance shown here.

Tire Size: 305/35R24 is a commonly used size with 24×10 wheels on full-size GM SUVs and keeps overall diameter close to the factory 275/55R20.

Rubbing: The gallery fitment notes list no rubbing and no trimming for this build. Final clearance should still be checked through full steering lock and suspension compression during installation.

Poke: The +30mm offset on the wider 10 inch wheel places the outer edge about 10mm farther toward the fender than the factory +27 setup. The result is a near-flush appearance rather than the more tucked factory wheel position.

Inner Clearance: The inner edge moves about 16mm closer to the suspension versus the factory 20×9 +27 reference and should be checked at full compression.

Center Bore: The Niche Rise in 6×139.7 uses a 106.1mm center bore, larger than the Tahoe’s 78.1mm hub, so the proper hub-centric rings should be used during installation.

Wheel Load Rating: The 24×10 Niche Rise has a 2,500 pound load rating per wheel. Tire load capacity should also be verified for the Tahoe application; XL-rated 305/35R24 tires are commonly used here.

Ride and Drivability

The biggest drivability change comes from the reduced tire sidewall. Moving from a 275/55R20 to a 305/35R24 dramatically reduces the amount of rubber between the wheel and the road, so sharper impacts and rough pavement will be more noticeable on Miami streets and highway expansion joints.

At the same time, keeping overall tire diameter close to the common 20 inch factory package helps preserve gearing, ride height and speedometer accuracy.

The wider 305mm tire also provides a larger footprint than the original 275mm tire without going unnecessarily wide for the 10 inch wheel.

Stock Suspension

The 2015–2020 Chevrolet Tahoe uses an independent front suspension and a multi-link coil-spring rear suspension. Optional magnetic ride and other package hardware were available, so exact damper and spring parts can vary even when ride height remains stock.

For gallery fitment purposes, the important detail is that this build maintains its factory ride height and does not rely on a lift or lowering modification to accommodate the 24 inch wheel and tire package.

Fitment Dynamics Miami

Fitment Dynamics carries wheels, tires and suspension upgrades for Chevrolet Tahoe applications, including Niche wheel and tire packages in 22, 24 and 26 inch fitments. Our team can help determine the proper wheel width, offset and tire size while accounting for fender clearance, suspension clearance, load capacity and everyday drivability.

Customers can visit Fitment Dynamics in the Miami area for professional wheel and tire installation, fitment assistance and local pickup, or have their wheel and tire package shipped nationwide directly to their door.

Fitment Dynamics
8224 NW South River Dr
Medley, FL 33166
786-244-5565